Performance Materials North America
  • Search
  • |BASF.com
  • |E-Business
  • |Contact Us

Ultramid® PA 66/6 (Nylon 66/6)

Polymamide (nylon)

 

Ultramid Polyamide C: This is the name given to copolyamides made from PA 6 and PA 66 building blocks from BASF. The formulation of the copolymer provides enhanced flowability in injection molding and higher clarity in film extrusion applications.

 

Quick Jump

Injection Molding
Film Extrusion

 

Ultramid® Polyamides: PA 66/6 Grades

 

Injection Molding

 

General Purpose Homopolymer

 

  •  
    Ultramid® C3U
    Ultramid C3U is an injection molding, general purpose PA6/66 grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness.

 

  •  
    Ultramid® C3U BK23079
    Ultramid C3U BK23079 is an injection molding, general purpose PA6/66, pigmented black grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness.

 

Flame Retarded

 

  •  
    Ultramid® C3U
    Ultramid C3U is an injection molding, general purpose PA6/66 grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness.

 

  •  
    Ultramid® C3U BK23079
    Ultramid C3U BK23079 is an injection molding, general purpose PA6/66, pigmented black grade with improved flame retardance. The product is UL recognized as 94V0 at 0.4 mm minimum thickness.

 

Film Extrusion

 

FDA Compliant

 

  •  
    Ultramid® C33 01
    Ultramid C33 01 is an intermediate viscosity PA6/66 grade. Its lower melting point than standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other countries will be provided on request.

 

  •  
    Ultramid® C33L 01
    Ultramid C33L 01 is an intermediate viscosity, copolymer 6/66. Its lower melting point than standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other countries will be provided on request.

 

  •  
    Ultramid® C33LN 01
    Ultramid C33LN 01 is an intermediate viscosity, copolymer PA6/66 grade. Its lower melting point than standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other countries will be provided on request.

 

  •  
    Ultramid® C40 L 01
    Ultramid C40 L 01 us a lubricated copolymer PA6/66 grade of high viscosity for the production of monofilaments and blown film. Ultramid C40 L 01 is well suited for the production of high transparency, nonsymetic blown film with reduced curl. It's very low melting point compared to standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

 

  •  
    Ultramid® C40LX 01
    Ultramid C40LX 01 is a high viscosity, copolymer PA6/66 grade. Improved transparency and gloss are enhanced by the incorporation of a high dose of lubricant. It conforms to FDA requirements including, 21 CFR 177.1500, EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other countries will be provided on request.

 

 

Datasheets

BASF Corporation Plastics Portal
 
Technical & Material Safety Datasheets Help
Search By: Trade Name | Grade | Property

No results found
Either there were no matches to the criteria selected or there was an error. Please recheck your search criteria.

If you are experiencing difficulty finding the product that you are interested in, please try our Help or use the following contact information:
BASF Engineering Plastics
1609 Biddle Avenue
Wyandotte, Michigan 48192
Telephone: 1-800-527-TECH
eMail: techquestions.na@basf.com